|
|
|
|
|
CSE-813MFTQ-441CB
|
- SuperChassis 813MFTQ-441CB (Black)
|
|
|
1U chassis support for max. motherboard size
- Micro ATX9.6"x 9.6" or ATX 12" x 10"
|
|
|
Supports dual, single Intel® / AMD processors
|
|
|
Height
|
|
Width
|
|
Depth
|
|
Packaging
|
- 23.4" (W) x 8.5" (H) x 29.7" (L)
|
Gross Weight
|
|
Available Colors
|
|
|
|
1x full-height expansion slot (Riser card required)
|
|
|
Hot-swap
|
- 4x 3.5" Hot-swap SAS / SATA drive bays
- SAS or enterprise SATA HDD only recommended
|
|
|
Others
|
- Front USB/COM tray in slim DVD bay (Optional)
|
|
|
Buttons
|
- Power On/Off button
- System Reset button
|
LEDs
|
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
|
|
|
|
6017R-MTLF, 6018R-MT, 6018R-MTR
|
|
|
|
Fans
|
- 4x 4cm high performance fans
- 2x additional fans optional ; 6x fans total maximum
|
|
|
|
Operating Temperature Range
|
|
Non-Operating Temperature Range
|
-
-40°C ~ 60°C (-40°F ~ 140°F)
|
Operating Relative Humidity Range
|
-
8% ~ 90% (non-condensing)
|
Non-Operating Relative Humidity Range
|
-
5% - 95% (non-condensing)
|
|
|
440W/480W AC power supply with PFC
|
AC Voltage
|
- 100-140 V, 5.5-4 Amp 50-60 Hz
- 180-240 V 3.5-2.5 Amp 50-60 Hz
|
+5V
|
|
+5V Standby
|
|
+12V
|
- 38.8A at 100-140Vac
- 39.1A at 180-240Vac
|
+3.3V
|
|
Certification
|
Platinum Certified [ Test Report ]
|
|
|
Power Supply Safety / EMC
|
- USA - UL listed, FCC
- Canada - CUL listed
- Europe/CE Mark
- EN 60950/IEC 60950-Compliant
|
|
|
|
|
|
| See Parts List
|
|
|
|
| Part Number
| Qty
| Description
|
Chassis
| CSE-813MFTQ-441CB
| 1
| 1U Short-Depth Chassis (Black)
|
Backplane
| BPN-SAS-815TQ-O-P
| 1
| BPN-SAS-815TQ-O-P
|
Power Supply
| PWS-441P-1H
| 1
| 440W/480W Platinum Power Supply
|
Cable 1
| CBL-0071L
| 1
| ROUND 16 pin TO 16 PIN RIBBON FP CABLE 30
|
Peripheral Drive
| CSE-PT93L-B
| 1
| Black DVD dummy cover for SC813, 813M, 815, PBF-RoHS
|
Fan
| FAN-0147L4
| 4
| 40x40x28 mm, 17.5K RPM, SC813MTS Middle Cooling Fan,RoHS/REACH,PBF
|
Floppy Disk & accessory
| CSE-PT94L-B
| 1
| Black FDD or USB tray dummy cover for SC813,813M,815,818 PBF
|
Front Panel
| FP813-D
| 1
| Front control board dual color for SC815,SC813M (C)
|
Fan Holder
| MCP-320-00031-0B
| 1
| Fan tray for six 40x28 fans(SC813M/113M)
|
Drive Trays
| MCP-220-00075-0B
| 4
| Black gen 5.5 hot-swap 3.5\" HDD tray
|
Part(s)
| MCP-340-00001-01
| 2
| Dummy fan 40x28mm
|
Part(s)
| MCP-260-00041-0N
| 1
| 1U I/O shield for X9 socket R server MB with Gasket
|
Mounting Rails
| MCP-290-00102-0N
| 1set
| Outer rail, quick-release type, 25.6\" to 33.05\"
|
Mounting Rails
| MCP-290-00108-0N
| 1set
| Inner rail, front, short, quick-release type
|
Mounting Rails
| MCP-290-00110-0N
| 1set
| Inner rail, extension (quick) for 1U 17.2
|
Cables
| CBL-0186L CBL-0157L
| 1 1
| SATA SET OF 4-56/45.5/35/23CM ROUND S-RA 8pin to 8pin ribbon cable with tube for SGPIO, 40cm, PBF
|
Chassis Parts
| MCP-120-00078-0N
| 1
| Optional 1U riser card bracekt for X9DRL-7F/EF
|
|
|
|
|
|
| Part Number
| Qty
| Description
|
Heatsink / Retention
| -
| -
| Please refer to our Thermal Components Matrix
|
Air Shroud
| MCP-310-18009-0N MCP-310-18003-0N MCP-310-19009-0N
| - - -
| Air Shroud for UP (single processor) Intel Foxhollow Air Shroud for DP (dual processor) Intel DP SC811, SC111, SC813M, SC113M, SC512F-280/350/410/520/600, SC513L-410/420, DP X9DBL ,X9 Mylar Air Shroud, 12"x 10" MB
|
Chassis Parts
| MCP-260-00024-0N
MCP-120-00031-0N
| - -
| 1U I/O shield for X8 server MB (3rd LAN + 4xLAN)
Riser card bracket for SC812,813,813M,815,111,113,113M
|
Mounting Rails
| MCP-290-00056-0N MCP-290-00052-0N-BULK
| - -
| 19" to 26.4" outer rail, for 1U 17.2" W chassis 25.6" to 33.05" outer rail, for 1U 17.2" W chassis (10 sets/pack)
|
Peripheral Drives
| MCP-220-00110-0B
| -
| Black USB/COM port tray in slim DVD bay
|
Front Bezel ( Compatibility Table )
| CSE-PTFB-813LB
| -
|
Front Bezel Cover with Key Lock and Filter, black
|
LCD/OLED Solutions
| -
| -
| Please reference the LCD/OLED Display Solutions for details
|
Adaptor HDD carrier
| MCP-220-00043-0N
| -
| Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray | | | |