ClimaxDigital HEC120IPPROV4 1080P HD 120m HDMI over IP/CAT 5E/6/7 Extender w/ IR. ClimaxDigital HEC120IPPROV4 (version 4) Full HD 1080P 120m HDMI over IP Extender Kit - HDMI over LAN with mounting ear and IR
*Alternative HDMI over IP extender HEC150IPLV2 1080P is in stock. Purchase it now at the Ebay address below
https://www.ebay.co.uk/itm/402579315126?hash=item5dbb98d9b6:g:CF8AAOSwjGxfv2of
Important!
HEC120IPPROV4 (version 4) sender only works with HEC120IPPROV4 (version 4) RX Receiver. please choose the right version. HEC120IPPROV4 does NOT support previous HEC120IPPRO If you need the sender or receiver for previous version HEC120IPPRO, please purchase it at ClimaxDigital Ebay shop. Click HEC120IPPRO ( https://www.ebay.co.uk/itm/402577274955 ) to buy it.
New version HEC120IPPROV4 (version 4)
The HEC120IPPROV4 is equipped with advanced IP protocol to deliver full HD 1080p video up to 120m(390ft) over single CAT6 cable.
For multi-display systems connect the Transmitter and multiple Receivers to a Gigabit Ethernet switch and 'mirror' the Source to many Display devices - ideal for Digital Signage, Sports Bars, House of Worship, Education and Hospital applications requiring multiple displays over longer distances using an existing LAN infrastructure. For each additional HD display, one HEC120IPPRO RX receiver is needed and can be purchased separately. One HEC120IPPROV4-TX Transmitter can be connected up to 253 HEC120IPPROV4-RX Receiver.
With added IR Control feature ,This feature allows the remote control of the source device (eg: Sky HD / Blu-ray etc.) at the extended display location, The TX and RX probes simply connect to the 3.5mm ports on the TX and RX Extender units at the source and display. IR probes are included.
Wall mountable design make the installation much easier.
Features
The HEC120IPPRO can be used to extend HD video to a single display (point-to-point) by connecting the HEC120IPPROV4-TX Transmitter to the HEC120IPPROV4-RX Receiver unit.
What's in the box 1. When you purchase - HEC120IPPROV4 with mounting ear and IR
- supports IR signal pass back
- Wall mountable design
- New 1080P HDMI Extender Kit over IP by SINGLE CAT5 CAT5e CAT6 CAT7 CABLE.
-
- Industrial grade design. comes with lighning protection, surge protection and ESD protection.
- lower transmission dealy (lower latency)
- support 20-60KHz IR devices.
- Control HD source devices from the receiver end (i.e TV display end)
- supports FULL HD 1080P UP TO 120m over single CAT6/CAT5E/CAT7
- Follow the standard of IEEE-568B,Auto-adjustment of feedback, equalization and amplify
- use single Ethernet cable to connect the HDMI source devices (such as HD camera, Blu-ray, Cable Box etc) to HDMI display for longer distances, up to 120M (390ft) using Cat6 cable, 100M (320ft) using Cat 5e cable or 80M (320ft) using Cat5 cable for 1080P
- HDCP compliant
- support a Point-to-Point connection via CATx
- supports a Point-to-Many connection via a Gigabit Ethernet network switch. Support for multiple transmitters requires a managed Gigabit Ethernet network switch.
- supports 480i@60Hz,480p@60Hz,576i@50Hz, 576p@50Hz,720p@50/60Hz,1080i@50/60Hz, 1080p@50/60Hz
- Support Multichannel Audio Formats Including Dolby Digital Plus, 7.1 LPCM, Dolby TrueHD and DTS Master Audio
- Easy installation with wall mountable design
- Only requires 1 CAT5/CAT6/CAT7 Cable
- Supports HDMI and HDCP
1 Sender (Tx)+1 Receiver (Rx), it includes - 1x HEC120IPPROV4 TX Sender Unit
- 1x HEC120IPPROV4 RX Receiver Unit
- 2 X 5V UK 3pin power supply
- User Manual
- 1 x IR blaster extension cable
- 1X IR receiver extension cable
2. When you purchase 1 Receiver (Rx) only, it includes
- 1x HEC120IPPROV4 RX Receiver Unit
- 1 X 5V UK 3pin power supply
- User Manual
- 1X IR receiver extension cable