PIONEER RT-909 / 901 Pinch Roller pair

£205.59 Buy It Now, £33.58 Shipping, eBay Money Back Guarantee
Seller: monypm ✉️ (2,274) 100%, Location: Sydney, New South Wales, AU, Ships to: AU, AMERICAS, EUROPE, ASIA, NZ, Item: 275930037284 PIONEER RT-909 / 901 Pinch Roller pair.
PIONEER RT-909 PINCH ROLLER SET    

This Pinch roller set (pair) is for  the specific model shown and are new fresh  manufactured in the EU for Nagravox using a modern synthetic black rubber formulation. 

Available either in  plain bronze bush (as per original) or our special   deluxe version.  (Please note we will supply what we have in stock and if different to your choice will invoice or credit the wee difference)

The moving assembly in the 'deluxe' version is with special low noise precision roller bearings instead of a plain sintered bronze bush. If you suspect your shaft is worn, then the deluxe version is recommended otherwise the plain sintered bronze bush works just as well.

 This kit contains:

  • European made new  non OEM pinch rollers using a modern synthetic rubber formulation.

All our kits and parts use specially sourced, new, freshly manufactured components from reliable manufacturers whom we have been dealing with for many years. NO  NOS  (new old stock) NO 2nd   hand items!!  Never buy or use a 2nd hand pinch roller or slip on tire - its just not worth it!

Nagravox continually researches pinch rollers, manufacturers and materials and is pleased to be able to offer a comprehensive assortment for a number of machines. Although we are specialists in Revox, Studer and Nagra we are also responding to many inquiries for other makes. 

SHARING SOME EXPERIENCE and RESEARCH on PINCH ROLLERS

WHAT DRIVES WHAT.  Myth busted. The pinch roller does not drive (or more correctly regulate) the tape motion. The capstan shaft does! The pinch roller only provides the force necessary so that the tape and capstan shaft are kept in intimate non slip contact with each other. 

HARDNESS / SOFTNESS.  Because the pinch roller minimises slip between the tape and capstan shaft, it must be hard enough not to deform too much which would compromise an even pressure over the full contact area. Further, one does not want the edges of the pinch roller (outside the width of the tape) to deform around the tape and contact the capstan shaft too strongly thus reducing the actual ability of the capstan to drive the tape. In short, a soft pinch roller is not good, will probably increase wow and flutter and also not last long.

PR PROFILE.  Researching the history of pinch rollers, Studer, a leader in its day, tried many different formulations, bush systems and profiles. Originally profiles were wide, flat and pinch rollers harder. Then they tried reducing the edge conflict by reducing width and profiling with a slight convex shape and softer ADP formulations so pressure was concentrated in the centre. The problem with this is that it is difficult to align the tape exactly at the peak of the convex profile. Then they went back to a flat profile and a harder formulation. No doubt if Studer had continued we would have seen other trials and tribulations. 

COMMENTS on "slip on" tires and cheap Chinese made. Hmmm ......  I suppose it really boils down to' you get what you pay for'.  Slip on tires you glue on are an absolute crock - dont waste your time!  All good pinch rollers should be rectified by a second grinding operation to minimise wobble and irregularities No slip on tire can accomplish this.  

Cheap Chinese made PR's are now the rage on ebay and elsewhere. We evaluate any new manufacturer of PR's and of course work with them (if they want to) to produce appropriate replacements. The current flood of el cheepo from a plethora of small general gadget vendors are poorly made, not to spec and some we have even found after seize up on the shaft after a short while.  Sometimes these inferior parts are also sold as if they were made in the EU.  They are not. Rest assured we evaluate ALL PR's coming onto the market with a view to liaise with and develop PR's that are fit for purpose equal to or exceeding original factory specs. Why is there this sudden flood of reel tables, NAB adapters and PR's at bargain cheap prices?  Originally one or more of the EU based Revox and Studer parts suppliers commissioned these to be made in China cheaply but did not realise that if they did not purchase in sufficient quantities on a  regular basis, these Asian manufacture's would simply make them anyway and hock them off via a string of general goods vendors.  

AGE.  How old is that 'new' pinch roller you bought? There are a mere handful of pinch roller manufacturers in the world . Some cling to old dated designs and profiles. Others believe they will make a fortune by making them as cheap as possible.  A significant problem is many vendors acquire over the years NOS stock of pinch rollers at a bargain price. Ask them manufacture date - anything more than 3 years - its already past its 1/2 year life. You get what you pay for. 

The condition of your motor shaft is paramount.   A rippled and shiny shaft matching the tape profile is an indication the shaft has done a lot of hours work and will not grip the tape effectively resulting in an increase wow. The shaft should be a dull grey colour. 

The tape tension  is also important because the PR / capstan is a regulating system not a driving system. This is controlled rudimentarily in early and most tape machines with back tension fixed but in more sophisticated machines it is measured and controlled dynamically and can be precisely set / calibrated.

Both formulations (ADP and synthetic black rubber) are used in our pinch rollers  and are carefully determined and controlled so as to maintain surface contact rigidity and minimise wow and flutter over their lifetime. Sometimes we offer ADP and others only black rubber and some both - this is based on our findings as best for the model considered.

Deluxe Pinch rollers with rollers bearings.  Some manufacturers' made their pinch rollers with single or dual low noise precision roller bearings. Claims have been made they give better wow and flutter performance. I have not found them to be better or worse frankly. I like them from an engineering stand point but cant really say they are vastly better in terms of performance. On high speed machines 30"/sec they come into their own with reduced mechanical noise and of course are ideal if your PR shaft is worn or out of round. Because they are sealed and lubricated for life, their life in hours may be less than a sintered bronze bush. However, these days most pinch rollers rubber deteriorates with age and this is the life limiting factor really.
What's the realistic life of a pinch roller? Whichever comes 1st. 1000 hours (mechanical wear) or 5 years (rubber deterioration).  

Patented  Design .  The Nagravox double and single roller bearing PR's are actually patented and made in the EU by our principals. They have a unique precision alignment mechanism and construction which ensures extremely accurate rotation and positioning minimising any wobble and subsequent wow and flutter. 

SERVICING and MAINTAINING YOUR PINCH ROLLER

  • Every 20 - 50 hours or whenever there is easily visible brown tape oxide build up clean the pinch roller surface with warm water in which a few drops of normal hand dishwashing liquid has been added. An old toothbrush may be useful as well as cotton buds or Q-tips as an implement. DON'T use any solvents such as alcohol.  In the case of a lot of hard oxide build-up (because you haven’t cleaned it for a long time  ... hoo boy  .. tut  ... tut.), you can use a small amount of switch contact cleaner (without lubricant)  to loosen the oxide and then immediately rinse with the warm water soap solution mentioned previously. Using the mild switch contact cleaner solvent sparingly and not often with immediate rinsing should not unduly affect the life of a pinch roller. Both natural rubber and polyurethane derivatives (Adiprene) will eventually be affected by any synthetic distilled solvent - the latter more so than the former. This cleaning can usually be performed in situ but in tough oxide build up removing the pinch roller may make things easier. DON'T slosh solvent or soapy water around other components on the deck, particularly tape guides and motor shafts. HEY - did you disconnect the power before doing this ?
  • Thoroughly dry the pinch roller surface using neutral absorbent paper towelling - not tissues as these sometimes have moisturising oils and scents added to them. Remove any left over fluff or cotton bud hairs.
  • Every 100 hours remove the PR and clean the shaft / brass bearing bush with iso propyl alcohol being careful not to slosh it around. Use a cotton bud.  Do not use any lubricant when reassembling. The PR should spin freely. The brass bush is self lubricating. NEVER try to lubricate a roller  bearing !
  • Every 5 years replace the pinch rollers and DON'T sell the old ones, even though they look "pristine", on Ebay!
  • Hey, have you thought about cleaning and demagnetising the heads and other tape transport components at the same time.  Pete says, "good idea".
WHY BUY FROM NAGRAVOX? 
*  My kits are relevant.    * My support is genuine and I am the only Revox and Studer service person offering it.   NAGRAVOX SERVICE UPGRADE KITS  are formulated to include all the bits likely to need replacing that are commonly related.  These target the most likely worn or age degraded parts. SUPPORT and HELP.   We try to incorporate most of the “confusing” or difficult aspects one needs to look out for in our upgrade kits instructional notes which we call “Service Sheets”.  We also refer you to the official factory service manuals most of which are in the public domain courtesy of Studer / Revox. As our customer we are happy to either provide you with a manual or refer you to the appropriate download site.  Further, as an after sales service, we are happy to answer any questions or difficulties you have in your repair or upgrade . We wont always know the answers but will certainly try our best to help. In any event, if we don’t know the answer it is an ideal opportunity for us to increase our knowledge and experience base and so  welcome all problems. Indeed perhaps you might share some of your innovative solutions and experiences. After all we certainly don’t know everything and welcome advice, suggestions and constructive criticism. My philosophy is that in reality their are few problems only solutions waiting to be communicated or discovered. Why do we offer this level of support?  Well as I indicated before, I do this out of a passion and I think I am right in saying so do you in your anticipated endeavors restoring your treasured vintage gear. It is in this common spirit I am happy to share my knowledge and experience with you as a customer. ABOUT NAGRAVOX      specialists in Revox, Studer and Nagra tape recorder overhaul and upgrade kits and parts.  I definitely DON'T consider Nagravox as a typical beady eyed Ebay vendor trying to get the highest price  and hocking anything that will sell.  Indeed ALL my kits and parts are buy it now not auction for that very reason.  I love and work with Revox, Studer and Nagra vintage gear every day. Its great equipment and I love helping other enthusiasts restore their gear. I back up everything offered with a help desk via email, phone or Skype to make sure what you buy from me works and is installed and set up the way it should be. Confusion and problems always occur on old gear but I am there to help you through it.  I don’t just sell stuff to enthusiasts - I help with solutions and make things as easy as possible whilst still retaining the high quality and integrity of the original designers. I am the only vendor that does this. Others of course may copy me, as they have already done in the last 2 years (just look at the other vendors suddenly offering overhaul kits on Ebay - hmm .... some with dubious white washing machine capacitors and below spec suppression caps !!).  I also am now re-manufacturing parts specifically for Revox, Studer and Nagra usually using small specialist manufacturers in Europe, Australia and Taiwan to my design and specifications. Some of the more complex triple can high voltage capacitors for example I personally hand make for the F36 / G36 machines and old A40 amplifiers. One enthusiast restoring a F36 said to me about a year ago - surely you cant make much money on those considering the time and effort involved? He is right of course but the satisfaction of knowing every time I sell one of those kits, a F or G36 will be brought back into this wonderful analogue world of ours, frankly tickles me pink!  Revox A77 VU meters now remanufactured and better quality that the original. Motor parts such as low friction washers, shims, brake felts, lubrication felts etc - all newly manufactured for Nagravox. Solutions that make problems go away - see our new NAB deluxe overhaul kits with reel spacer disks.  GOOD IDEA - you bet. Why hasn't anyone else thought of it - who knows - its not rocket science. Will people copy me - of course - that’s life. Am I worried - no not at all - ts all good for the analogue tape enthusiast who wins all the way.  Gee - I do ramble on a bit - don’t I!  If you are interested in our other endeavours please look at Nagravox or Laudarra.   If you want to have a chat or chin wag - comms me at Nagravox - only a pleasure.  Nagravox has a workshop and store in Sydney Australia.   Of course.. if you are ever in the vicinity please visit me  - there is always a good cup of tea or coffee and the chance of a chin wag.

Some blurb about me and why I do this.  Some people think I am a nutter!  Sometimes I might just agree!   My name is Peter Mony. I am according to  the  government "a senior citizen" - indeed I get to ride on all the trains, busses and ferries around Sydney for $2.50 flat fee a day (a perk of being 'old' I am told). I live in a stunningly beautiful part of the world in the Northern Beaches on the outskirts of Sydney Australia and am a tertiary qualified engineer and scientist.  I have worked in a few countries around the world for various companies in many different roles including in later years a few of my own businesses.  I love vintage audio equipment and have over the last 45 years been involved in one way or another with it.  I started Nagravox  in 2010 after 3 years of “hard thinking” (my wife thought I was asleep on the couch). I reckoned that I would love to see more of the old Revox, Studer and Nagra tape machines restored to their former glory.  I didn't want to be just another Ebay vendor hocking parts at the best price I could get for them. In 2011 I sold my specialist electronic manufacturing business Powerform Controls which was and still is successfully involved in HVAC controllers and electric motor speed control. This allowed me to have time to do those things in life which don’t necessarily have to be about making lots of money but rather being led in an ambulatory manner by ones passions.  I love playing classical guitar, classic cars and restoring old electronic gear. My wife and lovely daughters think I am nuts but they love me anyway. In 2016 I moved to a dedicated workshop and premises not far form home on the stunning Northern Beaches of Sydney.  In my “man cave”, as my dearest wife calls it, I can indulge a hobby and passion reliving my youth in the 60’s and 70’s when I was a youngster working as a recording studio technician and building valve amplifiers for friends. 

Why did I start in kits?  Over the years restoring Revox's, Studer's and Nagra's and inevitably running the gauntlet of finding information and spares, the engineer in me has often asked the question.  “Why cant I just get a professional upgrade kit with all the bits and pieces that are really needed”?  There is a high degree of frustration in sifting through the hype of vendors sales talk, doubt on individual components serviceability and age and the need to shop bit by bit with many of the “bits in between” not available. One inevitably makes compromises and sometimes quick fixes often leaving a niggle of doubt and sadly sometimes not the results one was expecting or indeed all the promo hype intimated.  Service manuals are obviously great but there is always those little nuances not fully explained, aspects seemingly missing and your particular fault symptoms not listed. Inevitably I have found that with old equipment replacing just the item that is obviously faulty or worn isn't always the end of the story or quick fix one had hoped for. So, on this basis and in a spirit of doing the job properly the first time, I have put together a series of what I call upgrade kits with all the necessary bits and pieces that are likely to be worn or old and need replacing. Each kit is designed to address an important functional aspect of ones restoration or repair eg a kit for the mechanical tape handling aspects which includes not just a new fresh Revox factory sourced pinch rollers but also the guide bearings made of stainless steel (not el cheepo skate board ones). If one of these needs replacing, you can be sure a lot of the associated componentry will be in a similar condition and also soon need replacing. Doing one without the other doesn't make sense! Why fault find a leaky capacitor and replace it when its likely all electrolytic and tantalum capacitors, some of which may be 40 years old, really should be replaced despite what they may test like under low voltage test conditions.  What a hassle to have to source 50 or so odd value capacitors and then worry about the quality of cheap and nasty 'old stock' components that have been sitting on a shelf for years or fake Chinese made components! My upgrade kits are thus formulated to include all the bits likely to need replacing that are commonly related. Most of the components that make up a Revox or Nagra tape machine were top quality in their day and a fair bit of the mechanical gear with a good clean up and lube will function fabulously for another 30 years. Yes, I do and can sell individual items but would prefer that you do the job properly and upgrade functionally related sections at a time. These are the ones that will likely be degrading your tape machines performance. My full kits have written explanations and guide notes with pictures to help you. I call these Service Sheets. The bits and pieces that go into the kits have been researched extensively, assessed carefully for suitability and tested in many restorations and projects. They are not just ordinary cheap replacements but something that will last and is of an appropriate quality and grade. Capacitors I researched extensively in my previous business when I needed a high grade electrolytic with low leakage current and long term stability for a particular timer application. I went through 22 different manufacturers before eventually accepting just 2 of those as being of a suitable compliance to specification, performance and quality for the application. One was Japanese and the other Taiwanese. I have used this invaluable experience to source and put together the full electrolytic / tantalum capacitor upgrade kits. Likewise for the lubricating oil for the robust Revox and Nagra capstan motors. Don’t be fooled by some of the Ebay and internet hype. For Revox there are specific oils you use depending on how old the motor is and you do not mix them nor convert  from one to the other.  For example, the PDP65 oil made by Kluber in Germany for both Nagra and later Revox / Studer capstan motors is very expensive but is the ONLY oil you should ever use on particular  motors. And, yes, you DO definitely need to lubricate despite Revox manuals being somewhat vague about it (later bulletins and in particular Studer did update and document this need for service lubrication). OK, before I digress further …. 

 

uh oh  .... . ...  here comes the small print and volumes of it ....!   Sigh  .......    bonehead small print ....   apologies for the 'officious' stuff! 

IMPORTANT THINGS TO CONSIDER WHEN YOU BUY FROM NAGRAVOX.  THESE ARE PART OF OUR TERMS and CONDITIONS of DOING BUSINESS.

1.  COMBINED ITEMS and POSTAGE SAVINGS 

If you are purchasing more than one item or kit, WE  DEFINITELY  OFFER COMBINED POSTAGE – no matter what a silly ebay message may say!!!! . Please either use the shopping cart (if available on your country version of ebay) or purchase individually BUT DON’T PAY. Continue buying individually BUT DON'T pay - as many times as you like. You can request an invoice if this option is available (not all eBay’s are the same!!!!)  rather than paying straight away – or just don’t do anything and I will send you a combined ebay invoice. This will enable us to send you a realistic invoice with appropriate reduced postage. This is also the best way for international customers where the Ebay calculator for postage may be inaccurate. Some country’s Ebay works oddly – there is believe it or not little consistency and somehow there is no shopping cart or it is complicated to combine the way one should be able to.  WE DEFINATELY OFFER COMBINED POSTAGE despite what ebay message might tell you (I have complained countless times and they refute there is a problem with some countries ebay version). If this is the case and you have difficulty combining multiple items, may I suggest you  purchase the 1st item and then send me a note on your paymnet with your other requirements and I will send a separate additional invoice.  Ok ... now I am going to let it all hang out here and spit the dummy / all toys out the cot! Many people just ignore this and buy and pay for multiple items separately with the implication, "he'll figure it out".   Hmmm I won’t! To refund the extra postage paid is a real hassle and ebay won’t refund their commission on the postage making me even crankier!!!. So, from now on, if you won’t follow these directions and you pay multiple times expecting me to figure it all out - I won’t. It will just stay as it is and I will have a beer on you. Thanks and cheers.

2. PLEASE NOTE - VERY IMPORTANT - POSTAGE COSTS, TIMES, TRACKABILITY, RISK and MORE……

 I apologise for burdening you with this bonehead stuff. The Ebay / Australia Post link up charges shown on Ebay are not clear indeed possibly misleading.  There is a collaboration and electronic link-up between Ebay and Australia Post which for the most part works well but there are some uh...oh's. We now only offer 2 levels of postage as insisted on by Ebay and Paypal and cannot offer the cheaper non tracked airmail service unfortunately.  For some countries particularly in Eastern Europe, some Asian countries and South America, there is NO TRACKED service. This is a conundrum because ebay and Paypal insist on a tracked service but have their heads in the sand when it comes to practical alternatives.  If we have to use airmail or registered service because there is no tracked service – the risk of this service with NO TRACKING is yours. You always have the option of selecting a courier service which is ridiculously expensive but is trackable at least. Why ebay don’t indicate that a tracked service is not available to your country is anyone’s guess  – who knows !!!!!!  We have recently ascertained that even registered airmail is trackable but just not by you directly on line.  If you take the tracking or consignment no. to your local post office they can track it internally.  This works in most of the countries that don't have tracked link up with Australia Post ... like Switzerland, Norway, Italy, Greece, Romania, Russian Federation etc etc.  Another learning moment recently.  International. Anything over 2 Kg can’t go Pack n Track and so will go registered or signed for airmail.

 POSTAGE SERVICES

Why is the postage so expensive?   Ebay charge a full commission on postage and we pass that on to you. Ebay insist on a tracked service (not always possible but they conveniently ignore that) which adds an additional cost. Some of the ebay postage calculators are in ‘lah lah’ land – and they may not be always in your favour! 

Local Australian Domestic is via Australia Post 500g. 1Kg or > satchel.  They are trackable and take 4-10 days to most of Australia except the wop wops which is a bit longer. 

International. Tracked or registered Airmail International via Australia Post International Airmail Service.  To those countries postal service that have a transparent international tracking system – we will send via a special Australia Post tracked service (Pack n Track). For those countries who don’t have an international compatible trackable collaboration we will send registered post which is safer, is not user trackable but is trackable until it enters your country but once it there.  The cost is typically approximately ~$20 to New Zealand and parts of Asia, ~$26 to N America and other parts of Asia and ~$30 to Europe and most other parts of the world.  The Ebay calculator will work this out more precisely and WILL include their commission!!  Time to destination. 1 - 4 weeks.  Mostly the speed is outstanding but sometimes it’s a bit slow for an airmail service but I think things get held up in your customs and local post who take their time. Please see proviso above of your risk if only registered or airmail service to your country is selected or only available.  Want your stuff in a hurry?  Courier / Express International. This is a fast (2 - 4 days), trackable, insured service and "ouch" expensive. We use either Australia Post EMS or DHL.  Is it worth It.?  If you are in a hurry or are really dubious of your post system (eg most places in Africa) then maybe.  We are investigating a DHL service that gets out of Australia on DHL but then coordinates with the national postal service in your country. It’s looking promising…  From time to time I may coordinate multiple items postage to a particular country and you may get your parcel via your local postal service. Please don't ask me to specifically use this facility as I may not be able to. All postage out of EEC will be using La Poste or Royal Mail and the "signed for" option which is trackable.

DECLARATION of value.   Usually this is at what you paid.  However, I believe, vintage audio enthusiasts should not be penalised for their hobby by greedy governments! So, if you want a specific value declared but at your risk, just ask.  Usually AUS$25 is the threshold.

POSTAGE WEIGHT CATEGORIES The first tier of weight category is at 500g and then 1Kg, 1.5Kg etc. (Domestic next category is 3Kg). If it goes over 500g for international its roughly 0.85x the lesser weight category cost.  Most cap pot kits weigh between 245 and 450g. Motor kits are about 150g.  Do ask for postage consolidation / invoice otherwise Ebay calculates separate postage charges on multiple items and it will cost you more. WE DEFINITELY OFFER COMBINED POSTAGE.

3. YOUR ADDRESS – this is really really important

It may be obvious but PLEASE make sure your address is 100% correct and add more information if there could be any possibility of ambiguity. THERE IS A LIMIT of 32 characters per line in the ebay / Paypal / Australia Post automatic link up and it does not warn you that address lines longer than 32 characters will be truncated. Do not exceed this 30character including spaces limit per line. Do not  use foreign language symbols like o  ß   ˘   ˆ   -   ~  °  Ç  . The automatic link between Ebay / Paypal and Australia Post will not translate these correctly and your parcel may be incorrectly addressed. We rely on this auto link up which is very good but won’t translate symbols properly or long lines of characters.  Please also use capitalisation for your name etc. It’s very unprofessional and just sloppy to use all lower case – yes I am a grumpy old man!. You be surprised how may addresses we get from Ebay without capitalisation, vague inferences to house or flat nos, all long address on 1 line and incomplete names. The information you provide to Paypal is automatically transferred into Australia Post and onto a label.  IT MUST BE PERFECTLY CLEAR and ACCURATE.  If it isn’t – the fault is with you and so is the risk.

Please make sure: 

·        DON’T exceed 30 characters per line including spaces. Use an extra line. 

·        Your full name is clear and capitalised appropriately eg  Mr Firstname Surname etc

·        House / flat / section number and street number are clearly demarcated with a comma and space between them.  Don’t use foreign language symbols like o  ß   ˘   ˆ   -   ~  ° these won’t be directly translatable by Aus Post / Ebay / Paypal. Spell it out on a separate line if it is a flat in a block in a street – no shorthand.

·        Suburb, Town is clearly shown    ·        City is shown on a separate line

·        UK people – Australia Post does not recognise your little hamlet of 5 people in the middle of a suburb or town. Add more information in case it spits the dummy which it often does for UK addresses – it likes a known suburb, town or city. 

·        Postal or Zip code is shown exactly as it should be. Don’t add spaces, embellishments or abbreviations. Australia Post system checks to see it is a valid international post code and spits the dummy if it isn’t. 

·        DON’T use abbreviations for your state.  Spell it out fully. Australia Post / ebay link up has a problem with this. Eg TX, MN etc means nothing to it.

·        Put your phone number in. SERIOUSLY its good idea if your post service want to get hold of you concerning your parcel! So many people don’t put a phone number in – why?

·        Put your direct contactable email address in – and please not one that you never use - I am not psychic!

4. WAITING FOR YOUR PARCEL

We only post out once a week usually on a Friday or if the wheels wobble, on Monday. We have given approx transit times above and these are on the pessimistic side of what Australia Post indicates.  Usually things are sent within a day or two airmail out of Australia once lodged. However parcels are often held up with your local post and customs for days and even weeks. From time to time we will also post out some parts from the EU using either LA Poste or Royal Mail this may or may or may not speed things up - who knows! Parcels to South America and East European countries can take up to 6 weeks – why – only the Gods know! Canada often has very slow postage.  UK, EU and USA are usually pretty quick but there are exceptions sometimes to the USA where some states postal service sometimes forget to wake up in the mornings.

 5.  GETTING SERVICE SHEETS and LITERATURE

THESE ARE NOT INCLUDED IN WHAT WE SEND YOU – you must request them. We do not include these in the parcel simply because postage and printing will cost more and updates are difficult to accommodate.  So, once you have received the parcel please contact us on our direct email  (no ebay mail please!) and indicate what kit you purchased. Contact us as per package label and we will gladly authorise MailBigFile to send you a once only link to download the service sheet. Please no Ebay mail - we cannot use that service for service sheets - it’s JUST NOT POSSIBLE.  Remember, please also detail exactly what kits you purchased as it saves me time having to look it up.   The service sheets are too big to send on normal emails as some email providers have a limit of 10 Mb. Some of our files are 200Mb.  So MailBigFile works well.  Please just be patient during the down load – it does take time and the strange interface makes it seem like nothing is happening. It is  …  go make a cup of tea! Please note ALL our literature is copyright and by receiving these you implicitly agree to comply with our copyright policy.

6. SUPPORT FOR NAGRAVOX KITS and PARTS.

I supply service sheets and support on the following basis.

You must request the service sheets by communicating directly with me by email after your kit has arrived as per above.  This then will be sent via a download service as a pdf document as they are usually too big for email. This may seem a strange way to do things but it is the most effective for me to make sure you have the latest service sheets as well as minimising postage and printing costs. 

Parts and cut down kits don't generally have service sheets - only full kits. Sometimes however I may have written a technical note applicable to a particular part and its installation which with pleasure is available to you.

Personal online support in the form of questions, problems, issues, advice etc via email or Skype or Facetime can only be given to those diy purchasers that have purchased kits and downloaded the applicable service sheets.  Please don't expect support if you don't bother to look at my service sheets. Although I have never had to limit the amount of time I give you in free support, in the future I reserve the right to possibly ask you for payment of extended support that may run into many hours or over many days.

Service Sheets are strictly copyright protected and I reserve all rights in any form of my IP.  ALL RIGHTS RESERVED Copyright © Jenform Australia Pty Ltd 2011. My service guides contain material protected under International Copyright Laws and Treaties. You may only use it for the private diy purposes intended – ie updating / upgrading / repairing your own vintage electronic device for which you have purchased a kit from Nagravox. No 3rd party is authorised.  Any unauthorized reprint or use of any of my material is prohibited. No part of any guide may be reproduced, communicated or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system without express written consent from Jenform Australia Pty Ltd - which will not be unreasonably withheld - just ask!

Service sheets are for DIY private enthusiast use only and NOT for commercial service, sales or competitors unless you have received permission by prior arrangement with me. This is not unreasonably withheld and I am quite approachable on a commercial liaison and agreement basis. I welcome commercial purchasers on a mutually cooperative and fellowship basis

6.  WARRANTY  

All our kits are warranted for 2 years from date of purchase on the basis of component replacement. In the unlikely event that you have a problem or are not happy with any aspect please contact us and give us a chance to remedy the situation.

7.  IMPERFECTIONS     definitely NO NOS or 2nd hand!

WE DON’T SELL ANY 2nd HAND CAPS or POTS!  On the can type multi-caps and electrolytics we hand make these and epoxy encapsulate them so there may be small traces of glue on the terminals.  Just scrape or file clean before soldering. Gosh … it is hand made by me personally…  I might even autograph one for you…. and may be famous one day …

8.  IF YOU HAVE AN ISSUE

Please contact me by simply sending a message on ebay or directly (better). Any other response somehow invokes Ebay police!  This includes “I haven’t got my package yet”.  Ebay very unfairly immediately consider the seller guilty of something and block funds with a pending black mark. Even if you have only just asked! We have very few issues and pride ourselves that nearly all are resolved easily. Very seldom do we have an unreasonable customer and most of you are into the spirit and credo in which I make these kits and parts available – indeed my raison d’etre.  I am here not because I need to make a living from Ebay as a beady eyed vendor or want to gouge as much as I can out of you. I am here because I want to see more of these old machines restored and treasured as they should be.  If you are grumpy and a pain in the ….  with an attitude please rather don’t buy anything from me. If you are a happy sort and have a positive outlook seeing the good in people rather than the negative, you will get a lot out of me and our relationship. We should always be able to sit down and have a cup of tea, glass of wine and a chat. So - No boneheads please!  Thanks.  Remember, contact me direct which is easier for me to give in depth answers. 

I apologise for all this “official” stuff above but over the years it has become necessary unfortunately.  Good on ya (as we say down under!) for reading this far! 

All the best with your restoration and hobby. I hope our kits and parts can help you achieve your goal of a perfectly operating Studer or Revox machine ... running like the proverbial Swiss watch! May the analogue force be with you.    

Kind Regards,

  • Condition: New
  • Type: Deluxe roller bearing version
  • Brand: Pioneer
  • Model: RT909

PicClick Insights - PIONEER RT-909 / 901 Pinch Roller pair PicClick Exclusive

  •  Popularity - 1 watcher, 0.0 new watchers per day, 271 days for sale on eBay. Normal amount watching. 1 sold, 1 available.
  •  Best Price -
  •  Seller - 2,274+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive